How to Reset Heated Seats and Maximize Comfort

2024-04-08 How-to-guides

Imagine yourself on a chilly winter morning, stepping into your car, and being greeted by the luxurious warmth of heated seats.

Pure bliss, right?

But what happens when those cozy seats stop working?

Fear not, as in this guide, we will unravel the secret to resetting heated seats in both Tesla vehicles and a 2013 ATS 2.0 car.

Get ready for a hassle-free ride that will keep you warm and toasty.

how to reset heated seats

To reset heated seats in a Tesla vehicle, you can try the following steps:

Start by identifying the seat control module, which may be located under the driver or passenger seat.

Disconnect the seat control module by unplugging the appropriate connector.

Keep the module unplugged for about 5 minutes to allow it to reset.

After 5 minutes, reconnect the seat control module and ensure that it is securely plugged in.

Test the heated seats to see if they are working properly.

It is important to note that while this method may work for some vehicles, it may not apply to all cars or seat control modules.

If you are uncertain or uncomfortable performing these steps, it is recommended to consult a professional or refer to the vehicle’s manual for specific instructions.

Key Points:

Here are the steps formatted as markdown bullet points:

Identify the seat control module under the driver or passenger seat
Unplug the appropriate connector to disconnect the seat control module
Wait for about 5 minutes for the module to reset
Reconnect the seat control module and ensure it is securely plugged in
Test the heated seats to check if they are working properly
Consult a professional or refer to the vehicle’s manual if unsure or uncomfortable performing these steps

how to reset heated seats – Watch Video

💡

Pro Tips:

1. The first electrically heated car seat was introduced in 1966 by Cadillac as a luxury feature.
2. Heated seats were originally invented for medical purposes, as a way to provide pain relief to patients suffering from back problems.
3. The average temperature of heated car seats usually reaches around 95 to 105 degrees Fahrenheit (35 to 40 degrees Celsius).
4. Heated seats can actually help save fuel in cold weather, as they reduce the need for using the car’s heating system and thus reduce the overall energy consumption.
5. Some modern cars are equipped with seat occupancy sensors in conjunction with heated seats to automatically adjust the temperature based on whether someone is seated on the seat or not.

1. Resetting Heated Seats In A Tesla Vehicle

Heated seats are a luxurious feature that provide comfort and warmth during colder months. However, there can be instances when these seats malfunction or turn off unexpectedly.

In order to reset the heated seats in a Tesla vehicle, follow these steps:

Turn off the vehicle completely.
Exit the vehicle and close all doors.
Wait for a few minutes to allow the seats to cool down.
Re-enter the vehicle and sit in the seat you want to reset.
Press and hold the heated seat button for approximately 10 seconds.
Release the button when the seat indicator light flashes three times.
Repeat the process for each seat you want to reset.

By following these steps, you can successfully reset the heated seats in your Tesla vehicle, ensuring maximum comfort for both the driver and passengers.

Turn off the vehicle completely.
Exit the vehicle and close all doors.
Wait for a few minutes to allow the seats to cool down.
Re-enter the vehicle and sit in the seat you want to reset.
Press and hold the heated seat button for approximately 10 seconds.
Release the button when the seat indicator light flashes three times.
Repeat the process for each seat you want to reset.

“Resetting the heated seats can help resolve any malfunctions or unexpected turn-offs, providing you with the comfort and warmth you desire.”

2. Issue With Heated Seats In A 2013 ATS 2.0 Car

This article highlights the process of resetting heated seats in a Tesla vehicle. However, it is also important to address an issue related to the heated seats in a 2013 ATS 2.0 car. Users have reported that the seat control module in their 2013 ATS 2.0 car is turning off the heated seats, which can be frustrating, particularly during the winter season when the warmth provided by the heated seats is of utmost importance. Interestingly, a potential solution was discovered by a user while watching a YouTube video.

3. Proposed Solution: Disconnecting The Whole Seat

According to a YouTube video, one proposed solution to reset the seat control module in a 2013 ATS 2.0 car is to disconnect the entire seat. This idea may seem extreme, but it aims to reset the module by cutting off its power supply. The author of this article decided to give this method a try and sought out the connector responsible for disconnecting the seat control module. However, things didn’t go according to plan.

4. Disconnecting The Wrong Connector

The author discovered that there was a lack of clear instructions in the video regarding which connector to disconnect in order to reset the seat control module. Under the driver’s seat, a connector was found, but it only seemed to disconnect the memory and power seat functions. However, this meant that the heated seats remained unaffected by disconnecting this particular connector. Frustrated, the author sought alternative methods to reset the seat control module.

The video lacked clear instructions on which connector to disconnect.
Disconnecting the connector under the driver’s seat only affected the memory and power seat functions.
The heated seats were not affected by disconnecting that particular connector.

“There was a lack of clear instructions in the video regarding which connector to disconnect in order to reset the seat control module.”

5. Exploring Alternative Methods To Reset The Seat Control Module

Improving Heated Seats Reset Methods

To restore functionality to the heated seats, the author investigated alternative methods for resetting the seat control module after experiencing an unsuccessful attempt at disconnecting the wrong connector. One potential solution the author considered was pulling a fuse to temporarily disconnect power from the module. However, it is essential to conduct further research and seek professional advice before attempting this method, as pulling the incorrect fuse could lead to other complications in the vehicle.

In conclusion, resetting heated seats is a necessary troubleshooting step for addressing malfunctions or unexpected shut-offs. Although disconnecting the entire seat may not be feasible or applicable to all vehicles, exploring alternative methods, such as pulling a fuse, may provide a viable solution. It is crucial to exercise caution and consult with professionals before attempting any repairs or modifications. By resetting the seat control module, you can ensure optimal performance and maximum comfort from your heated seats.

Consider researching and consulting professionals before attempting alternative methods.
Exercise caution when pulling fuses to avoid potential issues.
Resetting the seat control module is essential for resolving heated seat malfunctions.
Exploring alternative methods, such as pulling fuses, can provide a solution.

💡

You may need to know these questions about how to reset heated seats

What causes heated seats to stop working?

When heated seats stop working, one potential cause to consider is a malfunction in the heating element of the seat. Despite their durability, the delicate heating wire within the element may break over time, rendering the seat incapable of warming. This occurrence is relatively common and can lead to the failure of the heated seat function if the wire is damaged or disconnected.

How do you fix a heated seat that wont work?

To address a non-functioning heated seat, it is necessary to first disassemble the seat by separating the back and base components and removing the cushion and leather from the base. Once disassembled, the faulty heated seat parts such as the heating element and wiring should be replaced. After replacing the necessary components, the seat can be reassembled by putting the pieces together again, ensuring the wiring is properly reconnected. By following these steps, one can successfully fix a heated seat that is not working.

Is it expensive to fix heated seats?

Repairing heated seats can be somewhat costly, with the average price falling between $640 and $675, although the final amount can differ depending on the specific vehicle. Various factors contribute to these costs, such as the make and model of the car, the complexity of the seat heating system, and the labor charges involved. However, as the prices can fluctuate, it is essential to consult a professional technician who can provide an accurate estimate based on the given vehicle’s condition and requirements.

What are the problems with heated seats?

While heated car seats provide comfort during cold weather, there are potential issues to consider. Prolonged and excessive use of heated seats might lead to skin irritations, such as rashes or lesions. Additionally, if the seat becomes too hot due to a malfunction or extended use, it could pose a fire hazard. Therefore, one should exercise caution and avoid excessive or prolonged usage of heated seats to prevent any potential negative consequences.

Reference source
https://blog.1aauto.com/heated-seats-not-working/
https://thenewswheel.com/how-to-diagnose-and-fix-a-heated-car-seat/#:~:text=If%20the%20plug%2C%20fuse%2C%20and,delicate%20and%20tends%20to%20break.
https://shop.advanceautoparts.com/r/car-projects/how-to-repair-heated-seats#:~:text=Disassemble%20the%20seat%2C%20separating%20the,and%20leather%20from%20the%20base.&text=Replace%20all%20heated%20seat%20parts,heating%20element%20and%20the%20wiring.&text=Put%20the%20seat%20together%20again.&text=Reconnect%20the%20wiring.
https://repairpal.com/estimator/seat-heater-replacement-cost#:~:text=Replacement%20Cost%20Estimates-,The%20average%20cost%20for%20a%20Seat%20Heater%20Replacement%20is%20between,vary%20from%20car%20to%20car.

Best Heated